特黄特色的大片观看免费视频

                <dl id="t1x99"></dl>
              <progress id="t1x99"><track id="t1x99"></track></progress><thead id="t1x99"><address id="t1x99"></address></thead>
              <dl id="t1x99"><ruby id="t1x99"><dl id="t1x99"></dl></ruby></dl>
                <nobr id="t1x99"><form id="t1x99"><track id="t1x99"></track></form></nobr><dl id="t1x99"></dl>

                The advantages of sand casting

                2020-04-06 14:10:30

                Sand casting mainly refers to the production casting method in the process of operation. Its steel, iron and most nonferrous alloy castings can be obtained by sand casting method. Because the molding materials used for sand casting are cheap and easy to obtain, and the molds are simple and easy to manufacture, they can adapt to the single piece production, batch production and mass production of castings. For a long time, they have been the basic process in casting production.

                 Sand cast aluminum

                Sand casting uses clay and a suitable amount of water as the main binder of the sand. After making the sand, the mold is directly set and poured in the wet state. Wet casting has a long history and is widely used. The strength of wet sand depends on the clay slurry in which clay and water are mixed in a certain ratio. Once the molding sand is mixed, it has a certain strength, which can meet the requirements of molding and pouring. Therefore, the amount of clay and moisture in the molding sand are very important process factors.

                 

                Sand casting uses casting sand and core sand as molding materials to make casting molds. Liquid metal is filled with casting molds under gravity to produce castings. Steel, iron and most nonferrous alloy castings can be obtained by sand casting. Because the molding materials used for sand casting are cheap and easy to obtain, and the molds are simple and easy to manufacture, they can adapt to the single piece production, batch production and mass production of castings. For a long time, they have been the basic process in casting production.

                 

                The mold used for sand casting is generally composed of a combination of an outer sand mold and a core. In order to improve the surface quality of castings, a layer of paint is often brushed on the surface of the sand mold and the core. The main components of the coating are powdery materials and binders with high fire resistance and good high temperature chemical stability. In addition, a carrier (water or other solvent) and various additives are added for easy application.

                 Sand cast aluminum

                Advantages of sand casting

                ① Clay is rich in resources and cheap.

                ② The most used clay wet sand can be recycled after proper sand treatment.

                ③ Short manufacturing cycle and high work efficiency.

                ④ The mixed molding sand can be used for a long time.

                ⑤ After the sand mold is compacted, it can still be subjected to a small amount of deformation without damage, which is very beneficial to the draft and the lower core.


                ZheJiang Dongrun Casting Industry Co,.Ltd was built in 1995, We have been in the casting industry for more than 25 years. No matter what type of molding you need done, we are the right supplier for your jobs. Unlike other of our competition, we offer four types of castings.
                sand casting

                        ?Sand casting

                        ?Gravity Die Casting

                        ?High pressure Die casting

                        ?Low pressure casting


                Dongrun Casting have 20000 square meters facility houses and 200 production & test equipment, From quotation and tooling design to casting and finished machining, we  can work with you at every stage. We serves wide range of industries-from Fortune 500 corporations to small and midsize OEMs. Our products includes:

                      ?   Automotive&Trucking

                      ?   Utilities Industry

                      ?   Metering System

                      ?   HVAC

                        ?   Medical Device

                        ?   Electrical Lighting

                        ?   Architectural parts

                        ?   Furniture parts

                Browse our online showroom to see what we can do for you. And then E-mail:dongrun@dongruncasting.com us your specifications or inquiries today


                特黄特色的大片观看免费视频

                              <dl id="t1x99"></dl>
                            <progress id="t1x99"><track id="t1x99"></track></progress><thead id="t1x99"><address id="t1x99"></address></thead>
                            <dl id="t1x99"><ruby id="t1x99"><dl id="t1x99"></dl></ruby></dl>
                              <nobr id="t1x99"><form id="t1x99"><track id="t1x99"></track></form></nobr><dl id="t1x99"></dl>